Save space in the garden with the Apex Shed with Log Store. This is not only functional it adds interest to the standard garden shed.
This building is available for viewing at our display site at Longwater Business Park. We welcome you to visit us, to explore and discover your ideal timber building. For any inquiries, please feel free to contact us.
The Apex Shed with Log Store is a sturdy construction is evident from the outset, with ex 16mm x 125mm tongue and groove shiplap cladding wrapping the exterior, exuding a rustic charm. Supported by robust framing of ex 45mm x 38mm timber, rounded on all corners, the shed exudes strength and durability. Above, a polyester felt roof rests upon tongue and groove boards. Inside, the floor boasts tongue and groove panels laid on treated bearers, strategically spaced at 300mm intervals for stability. Two fixed windows, each approximately 610mm x 610mm, flood the interior with natural light, while a 740mm wide door, ledged and braced, offers easy access, secured by a hasp and staple with turn buttons and BZP T-hinges. Adjacent to the main structure, a 900mm wide log store with slatted walls provides ample storage for firewood.
Treated with a light brown dip preservative, this shelter boasts an eaves height of approximately 1.80m, rising to a ridge height of 2.30m, ensuring generous headroom and storage capacity. This Apex Shed with Log Store seamlessly combines practicality with classic design, creating a welcoming retreat in any outdoor space.
Standard Specification: | |||||
Cladding: | Ex 16mm x 125mm tongue & groove shiplap | ||||
Framing: | Ex 45mm x 38mm rounded on all corners | ||||
Roof: | Polyester felt on tongue & groove | ||||
Floor: | T&G on ex 45mm x 38mm treated bearers - set at every 300mm centres | ||||
Windows: | 2no. fixed 610mm x 610mm approx. - glazed | ||||
Door: | 740mm wide, ledged & braced with hasp & staple and turn buttons, BZP T-hinges | ||||
Log Store: | 900mm wide with slatted walls to 2 sides | ||||
Treatment: | Dip treated - Light Brown | ||||
Eaves Height: | 1.80m approx. | ||||
Ridge Height: | 2.30m approx. |
1. The customer is responsible for ensuring that the site is accessible and suitable for delivery and erection of the building in the size ordered. 2. If the Erector has no reasonable means of access to the site they have the right to leave your sectional building as a curb-side delivery only. 3. An adequate distance is required to be left around the building for installation - allowances should be made for roof overhangs. 4. The customer must advise us of any parking restrictions, your building will be delivered on a drop side truck and/or trailer. 5. The customer must advise at the time of ordering of any access restrictions including, but not limited to; walls, fences, hedging and any height restrictions i.e. brick archways, gate frames and any low hanging cables. 6. Access through neighbouring properties must be agreed before delivery. You will be liable for any damage caused to your neighbour’s property. 7. Should the site access or customer’s prepared base be deemed unsuitable, we reserve the right not to install the building. The building will be left on site on a delivery only basis and the original erection cost will be refunded. We can arrange for a new installation date, however, this will incur an additional cost. This cost will be determined on an order by order basis.
Please note cleared funds will be required approximately 10 days before delivery and/or erection of your Summer House.
This is normally taken when we call you up to arrange a delivery day and can be paid by Debit Card or Credit Card.
These can be done over the phone or we can provide our BACS details.
All dimensions are external corner to corner excluding overhangs, we recommend leaving enough space around your building for the overhang and maintenance.
Imperial measurements are approx. and should only be used as a guide.