Reverse Apex Shed

Standard Apex Shed

• Cladding: Ex 16mm x 125mm tongue & groove shiplap
• Framing: Ex 45mm x 38mm rounded on all corners
• Roof: Heavy duty felt on tongue & groove
• Floor: Tongue & groove on ex 45mm x 38mm treated bearers – set at every 300mm centres
• Windows: 2no. fixed 610mm x 610mm approx – glazed (except 1.80m x 1.20m – 1no. fixed only)
• Doors: 740mm wide, ledged & braced with hasp & staple and turn buttons, BZP T-hinges
• Treatment: Dip Treated with a spirit based treatment  – Light Brown
• Eaves Height: 1.90m approx
• Ridge Height: 2.30m approx

Access

1. The customer is responsible for ensuring that the site is accessible and suitable for delivery and erection of the building in the size ordered. 2. If the Erector has no reasonable means of access to the site they have the right to leave your sectional building as a curb-side delivery only. 3. An adequate distance is required to be left around the building for installation - allowances should be made for roof overhangs. 4. The customer must advise us of any parking restrictions, your building will be delivered on a drop side truck and/or trailer. 5. The customer must advise at the time of ordering of any access restrictions including, but not limited to; walls, fences, hedging and any height restrictions i.e. brick archways, gate frames and any low hanging cables. 6. Access through neighbouring properties must be agreed before delivery. You will be liable for any damage caused to your neighbour’s property. 7. Should the site access or customer’s prepared base be deemed unsuitable, we reserve the right not to install the building. The building will be left on site on a delivery only basis and the original erection cost will be refunded. We can arrange for a new installation date, however, this will incur an additional cost. This cost will be determined on an order by order basis.

Deposits

We ask for a 30% deposit with your order. 

Please note cleared funds will be required approximately 10 days before delivery and/or erection of your Summer House.

Balance Payments

We require the balance payment a week prior to delivery of the building.

This is normally taken when we call you up to arrange a delivery day and can be paid by Debit Card or Credit Card.

These can be done over the phone or we can provide our BACS details.

All dimensions are external corner to corner excluding overhangs, we recommend leaving enough space around your building for the overhang and maintenance.

Imperial measurements are approx. and should only be used as a guide.