Mono-pitch Gazebo Softwood
Product code: 213-MGSSpecification 150 x 150 pressure treated brown timber posts seated in galvanised shoes.
The Mono-pitch Gazebo Softwood has corners which are anchored by sturdy 150 x 150 pressure-treated brown timber posts, firmly seated in galvanised shoes ensuring stability. Rising above, a 150 x 50 pressure-treated brown ring beam encircles the structure, providing approximately 2.0 meters of generous clearance underneath.
The gazebo's integrity is further fortified by pressure-treated knee braces, meticulously placed to reinforce its architectural strength. Above, a symphony of craftsmanship unfolds as tongue-and-groove cladding blankets the roof, supported by a robust redwood framing, exuding natural warmth and charm. Embracing the essence of modern design, the roof adopts a sleek mono-pitch silhouette, adorned with EDPM black rubber roofing.
| SOFTWOOD Specification | ||||
| 150 x 150 pressure treated brown timber posts seated in galvanised shoes | ||||
| 150 X 50 Pressure treated brown ring beam - approx. 2.0m clearance | ||||
| Pressure treated knee braces | ||||
| T&G clad roof on redwood framing | ||||
| Mono-Pitch - EDPM Black rubber roofing |
Access
1. The customer is responsible for ensuring that the site is accessible and suitable for delivery and erection of the building in the size ordered. 2. If the Erector has no reasonable means of access to the site they have the right to leave your sectional building as a curb-side delivery only. 3. An adequate distance is required to be left around the building for installation - allowances should be made for roof overhangs. 4. The customer must advise us of any parking restrictions, your building will be delivered on a drop side truck and/or trailer. 5. The customer must advise at the time of ordering of any access restrictions including, but not limited to; walls, fences, hedging and any height restrictions i.e. brick archways, gate frames and any low hanging cables. 6. Access through neighbouring properties must be agreed before delivery. You will be liable for any damage caused to your neighbour’s property. 7. Should the site access or customer’s prepared base be deemed unsuitable, we reserve the right not to install the building. The building will be left on site on a delivery only basis and the original erection cost will be refunded. We can arrange for a new installation date, however, this will incur an additional cost. This cost will be determined on an order by order basis.
Deposits
We ask for a 30% deposit with your order.
Please note cleared funds will be required approximately 10 days before delivery and/or erection of your Summer House.
Balance Payments
We require the balance payment a week prior to delivery of the building.
This is normally taken when we call you up to arrange a delivery day and can be paid by Debit Card or Credit Card.
These can be done over the phone or we can provide our BACS details.