Heavy Duty Workshop
These buildings are ideal for use as a workshop, as well as giving
generous space for storage.
Made with robust and high grade timbers and designed to last.
Heavy Duty Workshop
- Cladding: Ex 16mm x 125mm Tongue and Groove Shiplap
- Framing: Ex 75mm x 50mm throughout
- Roof: EPDM on Tongue & Groove
- Base: Tongue & Groove on 45mm x 38mm treated bearers Set at every 300mm centres
- Windows: 1no. Opening – top hung, 1 no. Fixed – Glazed
- Doors: 1no. Pair Superior double doors – 1500mm wide approx. Mortice sash lock and handle set – Heavy Duty BZP ironmongery
- Treatment: Dip Treated with a spirit based preservative – Light Brown
- Ridge Height: 2.50m approx
- Eaves Height: 1.80m approx
Access
1. The customer is responsible for ensuring that the site is accessible and suitable for delivery and erection of the building in the size ordered. 2. If the Erector has no reasonable means of access to the site they have the right to leave your sectional building as a curb-side delivery only. 3. An adequate distance is required to be left around the building for installation - allowances should be made for roof overhangs. 4. The customer must advise us of any parking restrictions, your building will be delivered on a drop side truck and/or trailer. 5. The customer must advise at the time of ordering of any access restrictions including, but not limited to; walls, fences, hedging and any height restrictions i.e. brick archways, gate frames and any low hanging cables. 6. Access through neighbouring properties must be agreed before delivery. You will be liable for any damage caused to your neighbour’s property. 7. Should the site access or customer’s prepared base be deemed unsuitable, we reserve the right not to install the building. The building will be left on site on a delivery only basis and the original erection cost will be refunded. We can arrange for a new installation date, however, this will incur an additional cost. This cost will be determined on an order by order basis.
Deposits
We ask for a 30% deposit with your order.
Please note cleared funds will be required approximately 10 days before delivery and/or erection of your Summer House.
Balance Payments
We require the balance payment a week prior to delivery of the building.
This is normally taken when we call you up to arrange a delivery day and can be paid by Debit Card or Credit Card.
These can be done over the phone or we can provide our BACS details.
All dimensions are external corner to corner excluding overhangs, we recommend leaving enough space around your building for the overhang and maintenance.
Imperial measurements are approx. and should only be used as a guide.